Another 1/4 Pilot Tiger Moth Build

Radio Controlled and static aviation scale models. Including Nitro, Electric, Free flight, Control line and Gliders. All disciplines welcome.

Moderator: Moderators

Seank
Tree Tousand
Tree Tousand
Posts: 3325
Joined: Fri Jun 06, 2008 2:55 pm
Closest Airfield: Bomac
Location: Durbanville, Cape Town
Has liked: 1 time
Been liked: 10 times

Re: Another 1/4 Pilot Tiger Moth Build

Unread post by Seank » Sun Jun 23, 2019 7:40 pm

Here you can see how it fits into the plane.

Theuns, here is the Pilot plan that is redrawn in CAD,
PhotoPictureResizer_190623_193600896-2304x1728.jpg
You do not have the required permissions to view the files attached to this post.
http://www.seankriegler.com
Remember - "you only find out who is swimming naked when the tide goes out"
CNC Foam cutter building a new one
YES, I did it!!! I can now CNC cut epoxy glass and carbon fibre servo horns...
Seank
Tree Tousand
Tree Tousand
Posts: 3325
Joined: Fri Jun 06, 2008 2:55 pm
Closest Airfield: Bomac
Location: Durbanville, Cape Town
Has liked: 1 time
Been liked: 10 times

Re: Another 1/4 Pilot Tiger Moth Build

Unread post by Seank » Thu Jul 11, 2019 10:47 pm

After lots of drawing and many months, here are the proto type parts cut in 0.5mm brass. After deburring they turn out pretty good, next parts should be laser cut to make life easier.
IMG-20190711-WA0042.jpg
IMG-20190711-WA0043.jpg
IMG-20190711-WA0044.jpg
IMG-20190711-WA0044.jpg
IMG-20190711-WA0045.jpg
You do not have the required permissions to view the files attached to this post.
These users liked the author Seank for the post:
Peter Connan
http://www.seankriegler.com
Remember - "you only find out who is swimming naked when the tide goes out"
CNC Foam cutter building a new one
YES, I did it!!! I can now CNC cut epoxy glass and carbon fibre servo horns...
Seank
Tree Tousand
Tree Tousand
Posts: 3325
Joined: Fri Jun 06, 2008 2:55 pm
Closest Airfield: Bomac
Location: Durbanville, Cape Town
Has liked: 1 time
Been liked: 10 times

Re: Another 1/4 Pilot Tiger Moth Build

Unread post by Seank » Sun Jul 14, 2019 3:49 pm

IMG-20190714-WA0021.jpg
IMG-20190714-WA0018.jpg
IMG-20190714-WA0027.jpg
IMG-20190714-WA0024.jpg
IMG-20190714-WA0029.jpg
You do not have the required permissions to view the files attached to this post.
These users liked the author Seank for the post (total 3):
SNIPERTMEPeter Connan
http://www.seankriegler.com
Remember - "you only find out who is swimming naked when the tide goes out"
CNC Foam cutter building a new one
YES, I did it!!! I can now CNC cut epoxy glass and carbon fibre servo horns...

Return to “General Model Aircraft Chatter”